LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Controls And Fuel - 2.7L (L3B) - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap.
  2. GM5432171

    Intake Manifold Cover Bolt (1) - Remove [2x]

  3. Lift up on the front of the intake manifold cover (2).
  4. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove

  5. GM5457059

    Electrical Connector (1) - Disconnect [5x]

  6. Wiring Harness (2) - Reposition
  7. GM5457857

    Upper Intake Manifold Cover Nut (1) - Remove [2x]

  8. Radiator Surge Tank Inlet Hose Clip (2) @ Upper Intake Manifold Bracket (3) - Remove
  9. GM5457786

    Upper Intake Manifold Cover Nut (1) - Remove [2x]

  10. Upper Intake Manifold Bracket (2) - Remove
  11. GM5395527

    Camshaft Position Sensor Bolt (1) - Remove

  12. Disconnect the electrical connector.
  13. Camshaft Position Sensor (2) - Remove
scientia non olet · About LEMON Manuals