LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Throttle Inlet Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5405551

    Clean and inspect O-Ring and apply clean engine oil. Adhesives, Fluids, Lubricants, and Sealers

  2. Throttle Inlet Absolute Pressure Sensor (2) - Install
  3. Throttle Inlet Absolute Pressure Sensor Bolt (1) - Install
  4. Connect the electrical connector.
  5. GM5394953

    Front Wheelhouse Liner (3) - Install

  6. Front Wheelhouse Liner Retainer (2) - Install [4x]
    7. CAUTION:

    Refer to Fastener Caution .

  7. Front Wheelhouse Liner Screw (1) - Install and tighten [7x] - Fastener Specifications
  8. GM5394822

    Engine Front Splash Shield (3) - Install

  9. Engine Front Splash Shield Bolt (2) - Install and tighten [5x] - Fastener Specifications
  10. Retainer (1) - Install
  11. Install the front wheel and tire assembly. Tire and Wheel Removal and Installation
  12. GM5394936

    Front Bumper Fascia Bolt (2) - Install and tighten [2x] - Fastener Specifications

  13. Front Bumper Fascia Air Deflector Screw (1) - Install and tighten [3x] - Fastener Specifications
  14. GM5394612

    Front Tire Front Air Deflector (2) - Install

  15. Front Tire Front Air Deflector Bolt (1) - Install and tighten [4x] - Fastener Specifications
  16. Lower the vehicle.
  17. GM5628891

    Throttle Inlet Absolute Pressure Sensor Bolt (1) - Tighten - Fastener Specifications

scientia non olet · About LEMON Manuals