LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Knock Sensor Replacement (Position 1) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5299624

    Connect the electrical connector.

  2. Knock Sensor (2) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Knock Sensor Bolt (1) - Install and tighten - Fastener Specifications
  4. GM5395328

    Install the generator (1) with the lower generator mounting bolt (2).

  5. GM5395311

    Generator Bolt (1) - Install and tighten - Fastener Specifications

  6. Generator Bolt (2) - Install and tighten - Fastener Specifications
  7. GM5319644
    NOTE:

    Intake manifold is shown transparent for graphic clarity.

    Auxiliary Generator Battery Jumper Cable (2) - Install

  8. Battery Positive Cable Nut (1) @ Generator - Install and tighten - Fastener Specifications
  9. GM5319645

    Electrical Connector (1) - Connect

  10. GM5407593

    Radiator Inlet Hose Bracket (2) - Install

  11. Radiator Inlet Hose Bracket Bolt (1) - Install and tighten - Fastener Specifications
  12. GM5314509

    Charge Air Cooler Outlet Air Tube (2) @ Throttle Body (3) - Install

  13. Retainer Spring (1) - Install
  14. GM5129599

    Using an appropriate tool, rotate the drive belt tensioner (1) counterclockwise and hold tension.

  15. GM5129786

    Accessory Drive Primary Belt (1) - Install

  16. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  17. GM5335087

    Intake Manifold Cover (1) - Install

  18. Install the oil fill cap.
  19. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About LEMON Manuals