LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Intake Air Pressure and Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5420339

    Intake Air Pressure and Temperature Sensor (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Intake Air Pressure and Temperature Sensor Bolt (1) - Install and tighten - Fastener Specifications
  3. GM5420336
  4. Connect the electrical connector. (1)
  5. Perform the intake system learned values reset. Intake System Learned Values Reset 
scientia non olet · About LEMON Manuals