Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Feed Intermediate Pipe (2) - Install NEW
- Fuel Injection Fuel Feed Front Pipe Nut (3) - Tighten [2x] - Fastener Specifications
- Fuel Injection Fuel Feed Pipe Bolt (1) - Install and tighten - Fastener Specifications
- Reposition wiring harness as necessary.
Position back transmission vent hose and connect retainer.
Fuel Feed Pipe (1) - Connect - Metal Collar Quick Connect Fitting Service
- Position back wiring harness as necessary.
Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install
- NOTE:
Ensure the intake manifold cover retainers fully engage the intake manifold cover studs.
Push down on the front of the intake manifold cover (1) engaging the intake manifold cover retainers to the intake manifold cover studs.
- Install the oil fill cap.
- Pressurize the fuel system and inspect for leaks.
CAUTION:
Refer to Component Fastener Tightening Caution .
CAUTION:
Refer to Fastener Caution .