LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5319643

    Crankshaft Position Sensor (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Crankshaft Position Sensor Bolt (1) - Install and tighten - Fastener Specifications
  3. Connect the crankshaft position sensor electrical connector.
  4. Remove the support and lower the vehicle.
  5. Perform the crankshaft position variation learn. Crankshaft Position Variation Learn
scientia non olet · About LEMON Manuals