Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Front Bumper Fascia Center Air Deflector Screw (1) - Remove [10x]
Front Bumper Fascia Center Air Deflector Screw (1) - Remove [3x]
Front Bumper Fascia Center Air Deflector Screw (1) - Remove [6x]
- Front Bumper Fascia Center Air Deflector Bolt (2) - Remove [5x]
- Front Bumper Fascia Center Air Deflector Retainer (3) - Remove [2x]
Pull the front bumper fascia center air deflector (1) rearward and down from the front bumper fascia.
Radiator Air Lower Seal Retainer (1) - Remove [6x]
- Radiator Air Lower Baffle Retainer (2) - Remove
Radiator Air Lower Baffle (1) - Remove
Radiator Air Front Lower Baffle Retainer (1) - Remove [2x]
Radiator Air Front Lower Baffle (1) - Remove
Radiator Air Seal Retainer (1) - Remove [1x]
Radiator Air Seal Retainer (1) - Remove [1x]
- Lower the vehicle.
Radiator Air Upper Baffle Retainer (1) - Remove [7x]
- Radiator Air Upper Baffle (2) - Remove
Radiator Upper Bracket Bolt (1) - Remove [2x]
- Radiator Upper Bracket (2) - Remove
Radiator Air Seal Retainer (1) - Remove [2x]
- Wiring Harness Retainer (2) @ Radiator Air Side Baffle - Remove
Remove the radiator air side baffle (1) by manipulating it from beneath the radiator air upper baffle and from between the vehicle components.
Wiring Harness Retainer (1) - Remove
- Radiator Upper Bracket Bolt (2) - Remove [2x]
- Radiator Upper Bracket (3) - Remove
- NOTE:
Some components not shown for graphic clarity.
Radiator Air Seal Retainer (1) - Remove [2x]
Remove the radiator air side baffle (1) by manipulating it from beneath the radiator air upper baffle and from between the vehicle components.
Air Conditioning Condenser Tube Bolt (1) - Remove
- Air Conditioning Condenser Bolt (2) - Remove
- Without evacuating the system or disconnecting the air conditioning compressor and condenser hose, lift upward on the air conditioning condenser releasing it from the air conditioning condenser brackets. Reposition the air conditioning condenser forward approximately 3/4" and support with a appropriate device.
- Raise the vehicle.
Retainer Spring (1) - Release
- Charge Air Cooler Outlet Air Tube (2) @ Charge Air Cooler (3) - Remove
- Electrical Connector (4) - Disconnect
Retainer Spring (1) - Release
- Charge Air Cooler Inlet Air Tube (2) @ Charge Air Cooler (3) - Remove
Charge Air Cooler Bolt (1) - Remove [2x]
- Charge Air Cooler (2) - Remove
- If replacing charge air cooler transfer parts as necessary.