Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil fill cap.
Lift up on the front of the intake manifold cover. (1)
Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove
Disconnect the electrical connector.
- Camshaft Position Actuator Valve Solenoid Bolt (1) - Remove [2x]
- Camshaft Position Actuator Valve Solenoid (2) - Remove
- Camshaft Position Actuator Magnet Gasket (3) - Remove and DISCARD