LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Hydraulic Brakes - Repair Instructions) >> Repair Instructions >> Electronic Brake Booster Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5495344

    Brake System Control Module (1) - Install

  2. GM5495340
    CAUTION:

    Refer to Fastener Caution .

    Electronic Brake Control Module Bolt (1) - Install NEW and tighten [4x] 3 N.m (27 lb in)

  3. GM5324655

    Electrical Connector (1) @ Brake System Control Module - Connect

  4. Front End Sheet Metal Cross Brace - Install - Front End Sheet Metal Cross Brace Replacement
  5. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
  6. Reprogram the brake system control module. Control Module References
scientia non olet · About LEMON Manuals