LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Heating And Cooling - Repair Instructions (1 Of 2)) >> Repair Instructions >> Turbocharger Coolant Feed Hose Replacement (L3B) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5395443

    Turbocharger Coolant Feed Hose (2) - Install

  2. Hose Clamp (1) - Engage [2x] Hose Clamp Replacement Guidelines - Spring Type 
  3. GM5398967

    Air Cleaner Outlet Duct (1) - Install

  4. Connect the electrical connector.
  5. GM5398955

    Positive Crankcase Ventilation Tube (3) - Connect - Plastic Collar Quick Connect Fitting Service

  6. Evaporative Emission Canister Purge Tube (2) - Connect - Plastic Collar Quick Connect Fitting Service
    7. CAUTION:

    Refer to Fastener Caution .

  7. Air Cleaner Outlet Duct Clamp (1) - Tighten [2x] - Fastener Specifications
  8. GM5432174

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install

  9. GM5432171

    Push down on the front of the intake manifold cover (2).

    10. CAUTION:

    Refer to Fastener Caution .

  10. Intake Manifold Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
  11. Install the oil fill cap.
  12. Fill the cooling system to the proper level. Refer to Cooling System Draining and Filling (L3B Static Fill) , or Cooling System Draining and Filling (L3B GE 47716) 
  13. Start the engine and check for coolant leaks.
scientia non olet · About LEMON Manuals