Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Radiator Outlet Hose (4) - Install
- Install the radiator outlet hose retainer (3) into the radiator outlet hose connector.
- Install the radiator outlet hose (4) to the charge air cooler ensuring that the radiator outlet hose retainer (3) is fully engaged.
- Radiator Outlet Hose Clip (2) - Install
- Radiator Outlet Hose Clamp (1) - Engage [2x] - Hose Clamp Replacement Guidelines - Spring Type
Install the air cleaner (1) and air cleaner outlet duct (2) as an assembly.
- CAUTION:
Refer to Component Fastener Tightening Caution .
Air Cleaner Outlet Duct Clamp (2) - Tighten - Fastener Specifications
- Air Cleaner Bolt (1) - Install and tighten - Fastener Specifications
Electrical Connector (4) - Connect [2x]
- Evaporative Emission Canister Purge Tube (3) - Connect - Plastic Collar Quick Connect Fitting Service
- Positive Crankcase Ventilation Tube (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Wiring Harness Retainer (1) @ Air Cleaner Assembly - Install [4x]
- Fill the cooling system to the proper level. Cooling System Draining and Filling (LSY GE 47716) , or Cooling System Draining and Filling (LSY Static Fill) , or Cooling System Draining and Filling (LSY with V03 Static Fill) , or Cooling System Draining and Filling (LSY with V03 GE 47716)
- Start the engine and check for coolant leaks.
CAUTION:
Refer to Fastener Caution .