Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Floor Front Air Outlet Duct - Left Side- Outer (2) - Install
- Floor Front Air Outlet Duct Bolt (1) - Install and tighten - Fastener Specifications
- Connect the electrical connectors to the instrument panel knee bolster switches, and position the harness back to its original position.
Instrument Panel Knee Bolster (1) - Install
Data Link Connector Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Instrument Panel Knee Bolster Bolt (2) - Install and tighten [3x] - Fastener Specifications
Connect the electrical connector to the Instrument panel center trim pad (1) and install.
- Return the steering column to its original position.
- Front Floor Courtesy Lamp - Connect
Instrument Panel Lower Trim Panel Insulator (1) - Install
Install the tabs into the instrument panel lower trim panel insulator (1).
Instrument Panel Lower Trim Panel Insulator Retainer (1) - Install
- Instrument Panel Insulator Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Instrument Panel Insulator Nut (3) - Install and tighten [2x] - Fastener Specifications
Attach the hood primary latch release cable end retainer to the hood primary latch release cable handle (1).
Instrument Panel Lower Airbag - Driver Side (2) - Install
- Instrument Panel Lower Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
Instrument Panel Outer Trim Cover - Left Side (1) - Install
- Enable the SIR System. SIR Disabling and Enabling
CAUTION:
Refer to Fastener Caution .