Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Some components not shown for graphic clarity.
Receiver and Dehydrator (2) - Install
- Air Conditioning Receiver and Dehydrator Plug (1) - Install and tighten - Fastener Specifications
- Move the radiator air side baffle into position.
- NOTE:
Some components not shown for graphic clarity.
Radiator Air Side Baffle Retainer (1) - Install [2x]
Front Bumper Fascia Center Air Deflector (1) - Install
Front Bumper Fascia Air Deflector Retainer (2) - Install
- Front Bumper Fascia Air Deflector Bolt (1) - Install and tighten [4x] - Fastener Specifications
Front Bumper Fascia Center Air Deflector Bolt (1) - Install and tighten [6x] - Fastener Specifications .
- NOTE:
Left side shown, right side similar.
Front Bumper Fascia Lower Reinforcement- Right Side (2) - Install
- Front Bumper Fascia Air Deflector Bolt- Right Side (1) - Install and tighten [6x] - Fastener Specifications
- NOTE:
Left side shown, right side similar.
Front Bumper Fascia Air Deflector Bolt- Left Side and Right Side (3) - Install and tighten [8x] - Fastener Specifications
- Front Bumper Fascia Lower Stiffener Bolt- Right Side (2) - Install and tighten - Fastener Specifications
- Front Bumper Fascia Bolt- Right Side (1) - Install and tighten [6x] - Fastener Specifications
- Remove the support and lower the vehicle.
- Recharge the refrigerant. Refrigerant Recovery and Recharging
CAUTION:
Refer to Component Fastener Tightening Caution .
CAUTION:
Refer to Fastener Caution .