Removal Procedure
- Recover the refrigerant. Refrigerant Recovery and Recharging
Retainer Spring (1) - Release
- Charge Air Cooler Outlet Air Tube (2) @ Throttle Body (3) - Remove
- Remove the left front tire and wheel. Tire and Wheel Removal and Installation
- NOTE:
Quantity of fasteners may vary based on option content.
Front Tire Front Air Deflector Bolt (1) - Remove [4x]
- Front Tire Front Air Deflector (2) - Remove
Front Bumper Fascia Air Deflector Screw (1) - Remove [3x]
- Front Bumper Upper Fascia Screw (2) - Remove [2x]
- NOTE:
- Some components not shown for graphic clarity.
- Quantity of fasteners may vary based on option content.
Front Compartment Air Deflector Retainer (2) - Remove [2x]
- Engine Front Splash Shield Screw (1) - Remove [5x]
- Engine Front Splash Shield (3) - Remove
- NOTE:
Some components not shown for graphic clarity.
Front Wheelhouse Liner Bolt (1) - Remove [7x]
- Front Wheelhouse Liner Retainer (2) - Remove [4x]
- Front Wheelhouse Liner- Left Side (3) - Remove
Retainer Spring (1) - Release
- Charge Air Cooler Outlet Air Tube (2) @ Charge Air Cooler (3) - Remove
- NOTE:
Some components not shown for graphic clarity.
Using the appropriate tool, rotate the drive belt tensioner (1) counterclockwise to release the tension on the accessory drive primary belt (2) for removal.
- Accessory Drive Primary Belt (2) @ Air Conditioning Compressor (3) - Remove
Unfasten the radiator inlet hose clip (1), and position the radiator inlet hose (2) out of the way.
Disconnect the electrical connectors. (1) [3x]
Air Conditioning Compressor Hose Nut (1) - Remove
Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose (1) @ Air Conditioning Compressor - Remove
- Air Conditioning Compressor and Condenser Hose Seal (2) - Remove and DISCARD
- Air Conditioning Compressor Hose Seal (3) - Remove and DISCARD
Engine Wiring Harness Connector Bracket Nut (1) - Remove
- Engine Wiring Harness Connector Bracket (2) - Remove
Air Conditioning Compressor Nut (1) - Remove
Air Conditioning Compressor Nut (1) - Remove
- Air Conditioning Compressor Bolt (2) - Remove
- Maneuver the air conditioning compressor (3) out from the engine compartment.