Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Apply lubricant to the NEW valve stem. Adhesives, Fluids, Lubricants, and Sealers
- NOTE:
Ensure the tool is fully engaged with tire valve stem threads.
Using a tire valve stem installation tool (2), pull the valve stem (1) through in a direction parallel to the valve hole on the wheel.
- Inspect the valve stem to ensure that it is fully seated on the rim as follows:
- The rim hole edge has to be completely in the notch of the valve stem.
- The valve and the rim hole have to be concentric.
- Mount the tire to the wheel. Tire Dismounting and Mounting
- Inflate the tire to the specified pressure as stated on the tire placard.
- Install the NEW dust cap.
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.