Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
Rear Brake Hose Clip Bolt (1) - Remove [2x]
- Reposition the rear brake line (2).
Remove the 2 rear wheel speed sensor harness retainers (1) from the rear suspension upper control arm.
Rear Suspension Upper Control Arm Inner Nut (2) - Remove
- Rear Suspension Upper Control Arm Inner Bolt (1) - Remove and DISCARD
Rear Suspension Upper Control Arm Outer Nut (1) - Remove
- Rear Suspension Upper Control Arm Outer Bolt (3) - Remove and DISCARD
Rear Suspension Upper Control Arm (1) - Remove