Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the passenger side seat. Front Seat Removal and Installation , or Front Seat Removal and Installation (Blackwing)
Using a flat-bladed plastic trim tool, release the retainer clips.
- Front Floor Console Extension Panel - Right Side (1) - Remove
- NOTE:
Left side shown, right side similar.
With a flat bladed plastic trim tool, start at the front and work your way back to release the clips.
- Instrument Panel Outer Trim Cover (1) - Remove
- { If equipped } Disconnect the electrical connector.
Starting at the rear of the front side door sill garnish molding (1), pull upward at the b-pillar joint to disengage the garnish molding.
- Work your way forward disengaging all the front side door sill garnish molding clips then pull rearward to disengage the clip on the forward vertical wall.
- Front Side Door Sill Garnish Molding (1) - Remove
Floor Carpet Retainer (1) - Remove
- Front Floor Panel Carpet-Right Side (2) - Remove