Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut Upper Mounting Nut (1) - Install, but do NOT tighten [3x]
Courtesy of GENERAL MOTORS COMPANY

Steering Knuckle Bolt (2) - Install [2x]

CAUTION:

Refer to Fastener Caution .

Steering Knuckle Nut (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Stabilizer Shaft Link Nut (1) @ Front Suspension Strut - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Reposition the front brake hose and install the brake hose fitting bolt (1) to the front suspension strut bracket. Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Install the electronic suspension wheel front vertical accelerometer (2) to the front suspension strut bracket.
Electronic Suspension Front Vertical Accelerometer Bolt (1) Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Install the front wheel speed sensor harness retainer (1) to the front suspension strut bracket.
Courtesy of GENERAL MOTORS COMPANY

Connect the front suspension strut electrical connector (1).
Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
Remove the support and lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Front Suspension Strut Upper Mounting Nut (1) - Tighten [3x]- Fastener Specifications
Measure and adjust the wheel alignment. Wheel Alignment Measurement