Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Prepare the 2 front brake caliper bracket bolts for installation as follows:
1. Remove any loose cured adhesive from the external threads of the components using a lint free cloth.
2. Thread the cleaned components into the internal mating threads and remove to loosen trapped cured adhesive.
3. Apply thread locking adhesive to the external threads of the components. Adhesives, Fluids, Lubricants, and Sealers
4. Ensure there are no gaps in the thread locking adhesive once applied to the component.
Courtesy of GENERAL MOTORS COMPANY

Front Brake Caliper Bracket (2) - Install

CAUTION:

Fastener Caution

Front Brake Caliper Bolt (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Brake Caliper (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Brake Caliper Guide Pin Bolt (1) - Install [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

{If equipped} Front Disc Brake Pad Wear Sensor (2) @ Front Brake Caliper - Install
Front Brake Caliper Bleeder Valve Cap (1) - Install
Install the tire and wheel assembly. Tire and Wheel Removal and Installation
Remove the support and lower the vehicle.
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection