LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Disc Brakes) >> Repair Instructions >> Brake Pad Life Monitoring Reset

Brake Pad Life Monitoring Reset

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

The Brake Pad Life Monitoring Reset Learn is required after replacing the brake pads.

The Brake Pad Life Monitoring Reset Learn procedure can be completed with a scan tool using the following steps:

  1. Install the scan tool to the data link connector.
  2. Ignition ON, engine OFF.
  3. Select the Front Axle Brake Pad Life Monitoring Reset or Rear Axle Brake Pad Life Monitoring Reset in the Brake System Control Module Configuration/Reset Functions list.
  4. Follow the scan tool directions to complete the reset procedure.
  5. Clear any DTCs that may be set.
scientia non olet · About LEMON Manuals