LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Transfer Case - BW 4475) >> Repair Instructions - On Vehicle >> Transfer Case Fluid Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5330523Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

    Transfer Case Fluid Temperature Sensor (1) - Install and tighten - Fastener Specifications 

  2. Connect the transfer case fluid temperature sensor electrical connector.
  3. Fill the transfer case to the correct level with the correct fluid.
  4. Remove the drain pan.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals