Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify there are no related DTCs set in the following system: Engine Mount System
- If a related DTC is not set
- Go to next step: If a related DTC is set
- Perform the scan tool function: Engine Mount Control Circuit - On and Off
- If the component does not turn On and Off
Refer to Circuit/System Testing.
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.