Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Sunroof Window (2) - Remove - Sunroof Window Replacement
Roof Stationary Window (2) - Remove - Roof Stationary Window Replacement
- Place the driver and passenger seat in the fully reclined position.
- It is only necessary to lower the headlining. Only do those steps in the headlining procedure that will allow access to the component being removed. Headlining Trim Panel Replacement (With C3U)
Disconnect the sunroof housing front drain hoses (1) from the front sunroof housing drain gutters.
Disconnect the sunroof housing rear drain hoses (1) from the rear sunroof housing drain gutters.
- Disconnect the electrical connectors.
Remove the 22 sunroof module bolts (1), leaving the side 2 centermost sunroof module bolts (2) installed.
With the aid of an assistant, remove the 2 remaining sunroof module bolts (1) and gently lower the sunroof housing (2).
With the aid of an assistant, carefully remove the sunroof housing (1) and place on a clean prepared surface.
- Transfer components as necessary.