Front Seat Vent Fan Mat Replacement (Blackwing)
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
WARNING:
To avoid personal injury, perform a passenger presence sensor rezeroing/learn on the passenger presence system whenever you remove or replace the seat cushion trim. Failure to do so may cause the system to malfunction.
WARNING:
Preliminary Procedure Remove the front seat cushion cover and pad as an assembly, it is not necessary to separate them. Front Seat Cushion Cover and Pad Replacement (Blackwing)The passenger seat cushion assembly is serviced in a kit with the airbag front passenger presence module, cushion pad (and if equipped, heat mat, vent mat, vent mat support, comfort pads). All components in the service kit are assembled and calibrated as a unit and must be replaced as a complete assembly to prevent possible injury to the occupant. Using only some of the components in the service kit will cause the passenger presence system to operate improperly. |
|
| 1 | Front Seat Vent Fan Mat Procedure If servicing the passenger seat, perform the necessary programming and setup procedure for the passenger presence system. Control Module References |