Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Install the valve rocker arm cover. Refer to Valve Rocker Arm Cover Installation - Left Side
- Wiring Harness Connector @ Ignition Coil - Connect [4x]
- Spark Plug Wire @ Ignition Coil - Connect [4x]
Install the left rocker arm cover insulator. Refer to Valve Rocker Arm Cover Insulator Replacement - Left Side
NOTE:
Note the location and routing of the wiring harness to ensure proper reinstallation.