Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Apply a 3 mm (0.118 in) bead of RTV sealant on the engine front cover as shown (a). Apply a 5 mm (0.197 in) bead of RTV sealant on the engine front cover as shown (b). Refer to Adhesives, Fluids, Lubricants, and Sealers .
Install the front cover (4).
- Install the front cover bolts (1-3) and tighten to 25 N.m (18 lb ft).
Connect the electrical connectors (1).
- Install the engine coolant manifold. Refer to Engine Coolant Manifold Replacement (LT4) .
- Install the crankshaft balancer. Refer to Crankshaft Balancer Installation
- Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Accessory .
- Install the oil pan. Refer to Oil Pan Replacement .
CAUTION:
Refer to Fastener Caution .