Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
Install EN-51096 Crankshaft Rear Seal Remover onto GE-23907-1 Slide Hammer.
- Slide the small bend of EN-51096 Crankshaft Rear Seal Remover between the lip of the rear seal and crankshaft. Ensure that the small bend of EN-51096 Crankshaft Rear Seal Remover engages the rear side of the rear seal (1). While rotating EN-51096 Crankshaft Rear Seal Remover and GE-23907-1 Slide Hammer around the seal and use the slide hammer to remove the seal.
NOTE:
EN-51096 Crankshaft Rear Seal Remover has two ends. The end with the small bend will be used to remove the seal.