LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Engine Mechanical - 6.2L (LT4) - Repair Instructions) >> Repair Instructions >> Charge Air Cooler Cover Installation (LT4) >> Single Use Fasteners and Components

Single Use Fasteners and Components

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Charge Air Cooler Housing Gasket

Fig 1: Exploded View Of Charge Air Cooler Cover Installation Components With Tightening Sequence (LT4)
GM4042565Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Charge Air Cooler Housing Gasket
NOTE:

Must use a NEW Gasket.
2 Charge Air Cooler Cover
3 Charge Air Cooler Cover Bolt (Qty: 11)
CAUTION:

Refer to Fastener Caution .

Tighten:

  1. The bolts in sequence to 10 N.m (89 lb in).
  2. Retighten bolts 1 - 8 in sequence to torque.
4 Charge Air Cooler Cover Double Ended Stud (Qty. 5)

Tighten:

  1. The bolts in sequence to 10 N.m (89 lb in).
  2. Retighten bolts 1 - 8 in sequence to torque.
5 Charge Air Cooler Cover Ball Stud (Qty. 4)

Tighten:

  1. The bolts in sequence to 10 N.m (89 lb in).
  2. Retighten bolts 1 - 8 in sequence to torque.
scientia non olet · About LEMON Manuals