Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Plenum Front Panel(1) - Remove - Plenum Front Panel Replacement (without Blackwing)Plenum Front Panel Replacement (with Blackwing)
Install a cap or plug to the exposed hose and clutch master cylinder fittings in order to prevent fluid loss and contamination.
- Remove the clutch master cylinder pipe retaining clip (3) from the clutch master cylinder pipe adapter.
- Using a suitable tool, remove the clutch master cylinder pipe (2) from the dampener (1).
Remove the clutch master cylinder pipe retaining clip (1) from the clutch master cylinder.
- Remove the clutch master cylinder pipe adapter (3) from the clutch master cylinder pipe bracket bracket (2).
- Remove clutch master cylinder pipe bracket (2).
Remove the clutch master cylinder pipe retaining clip (3) from the clutch master cylinder.
- Remove the clutch master cylinder pipe adapter (2) from the clutch actuator cylinder pipe.