LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Suspension Controls System) >> Repair Instructions >> Electronic Suspension Wheel Front Vertical Accelerometer Replacement (FE2, FE3) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
  3. Front Wheelhouse Liner - Reposition - Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (Blackwing)
  4. Disconnect the electronic suspension wheel front vertical accelerometer electrical connector (1).
    GM5323934Courtesy of GENERAL MOTORS COMPANY
  5. Unclip the 5 electronic suspension wheel front vertical accelerometer retainers (2).
  6. Unclip the 3 electronic suspension wheel front vertical accelerometer retainers (1).
    GM5323937Courtesy of GENERAL MOTORS COMPANY
  7. Electronic Suspension Front Vertical Accelerometer Bolt (1) - Remove
    GM5323940Courtesy of GENERAL MOTORS COMPANY
  8. Electronic Suspension Wheel Front Vertical Accelerometer (2) - Remove