Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Oil Level Indicator Tube Seal (2) - Install NEW
Position the oil level indicator tube (1) by sliding the tube down and in to the approximate location of the lower crankcase hole.
- Guide the lower portion of the oil level indicator tube into the lower crankcase hole and seat the oil level indicator tube in place
- Oil Level Indicator Tube Bracket Bolt (2) - Install and tighten [2x] 10 N.m (89 lb in)
- Connect the electrical connectors.
- Charge Air Cooler Inlet Air Tube - Right Side - Install - Charge Air Cooler Inlet Air Tube Replacement - Right Side
CAUTION:
Refer to Fastener Caution .