LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Engine Mechanical - 3.0L (LGY) - Repair Instructions) >> Repair Instructions >> Engine Mount Replacement - Left Side (RWD) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5519755Courtesy of GENERAL MOTORS COMPANY

    Engine Mount (2) - Install

  2. GM5500476Courtesy of GENERAL MOTORS COMPANY

    Engine Oil Cooler Seal (2) - Install NEW [2x]

  3. Engine Oil Cooler (1) - Install
  4. GM5500451Courtesy of GENERAL MOTORS COMPANY

    Engine Oil Cooler Adapter Bolt (1) - Install [4x] - Engine Oil Cooler Replacement (LGY)

  5. Remove the drain pan.
  6. GM5519755Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Engine Mount Bolt (1) - Install and tighten to 58 N.m (43 lb ft) [2x]

  7. GM5313368Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Air Deflector (1) - Install - Front Compartment Air Deflector Replacement (RWD)

  8. Lower the vehicle.
  9. Lower the left side of engine onto mount.
  10. GM5335541Courtesy of GENERAL MOTORS COMPANY

    Engine Mount Nut - Left Side (1) - Install and tighten to 70 N.m (52 lb ft)

  11. Engine Support Fixture - Remove - Engine Support Fixture 
  12. Fill the engine oil to the proper level with NEW engine oil.