Charge Air Cooler Cover Disassemble

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Insulator Retainer (1) - Remove [6x]
Charge Air Cooler Insulator (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Coolant Manifold Bolt (1) - Remove [2x]
Charge Air Cooler Coolant Hose Clamp (2) - Remove [4x]
Charge Air Cooler Coolant Hose (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Manifold Absolute Pressure Sensor Bolt (1) - Remove
Intake Air Pressure and Temperature Sensor Bolt (1) - Remove
Intake Air Pressure and Temperature Sensor (2) - Remove
Manifold Absolute Pressure Sensor (3) - Remove
Evaporative Emission Canister (4) - Remove
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Retainer (1) - Remove [6x]
Charge Air Cooler Inlet Air Tube Bolt (2) - Remove [6x]
Charge Air Cooler - Left Side (3) - Remove
Charge Air Cooler Housing Gasket (4) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Retainer (1) - Remove [6x]
Charge Air Cooler Inlet Air Tube Bolt (2) - Remove [6x]
Charge Air Cooler - Right Side (3) - Remove
Charge Air Cooler Housing Gasket (4) - Remove and DISCARD
Fig 1: Exploded View Of Throttle Body Components
Courtesy of GENERAL MOTORS COMPANY

Throttle Actuator Wire (1) - Remove
Throttle Body Bolt (2) - Remove [4x]
Throttle Body (3) - Remove
Throttle Body Gasket (4) - Remove and DISCARD
Charge Air Cooler Cover Seal (5) - Remove and DISCARD