Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Front Compartment Side Sight Shield (2) - Remove [2x] - Front Compartment Side Sight Shield Replacement (without Blackwing)
- Hood - Remove - Hood Replacement
Radiator Air Upper Baffle (1) - Remove - Radiator Air Upper Baffle Replacement (LSY)
- Remove the cylinder 1 and cylinder 4 ignition coils. Ignition Coil Replacement
EN-36857 Engine Lift Bracket Set (1) - Install
- EN-51768 Engine Support Fixture Adapter Bolts - M8 (2) - Install and tighten to 65 N.m (48 lb ft)
EN-36857 Engine Lift Bracket Set (1) - Install
- EN-51768 Engine Support Fixture Adapter Bolts - M8 (2) - Install and tighten to 65 N.m (48 lb ft)
- NOTE:
Ensure that the engine support fixture only contacts the frame. Do not install on top of fender lip.
EN-51007 Global Engine Support Fixture (1) - Install
CAUTION:
Refer to Fastener Caution .