Engine Coolant Air Bleed Pipe Installation

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Turbocharger Oil Feed Pipe Gasket (2) - Install NEW
Engine Coolant Air Bleed Pipe (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Air Bleed Pipe Bolt (1) - Install, but do NOT tighten [2x]
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Air Bleed Pipe (2) @ Engine Coolant Flow Control Valve (3) - Install
Clamp (4) - Install - Hose Clamp Replacement Guidelines - Spring Type

CAUTION:

Fastener Caution

Engine Coolant Air Bleed Pipe Bolt (1) - Install and tighten to 8.5 N.m (75 lb in)
Courtesy of GENERAL MOTORS COMPANY

Engine Coolant Air Bleed Pipe Bolt (1) - Tighten [2x] 8.5 N.m (75 lb in)