LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Engine Mechanical - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Engine Block Overhaul >> Engine Block Disassemble Procedure

Engine Block Disassemble Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5926602Courtesy of GENERAL MOTORS COMPANY

    Engine Coolant Temperature Sensor (1) - Remove

  2. Starter Locating Pin (2) - Remove [2x]
  3. {without K05} Remove the engine coolant heater hole plug (3).
  4. {with K05} Remove the engine coolant heater (4).
  5. GM5028816Courtesy of GENERAL MOTORS COMPANY

    Engine Block Core Hole Plug (1) - Remove

  6. Guide Pin (2, 3) - Remove [4x]
  7. GM5028818Courtesy of GENERAL MOTORS COMPANY

    Cylinder Head Locating Pin (1) - Remove [2x]

  8. GM5028819Courtesy of GENERAL MOTORS COMPANY

    Piston Oil Nozzle Bolt (2) - Remove [4x]

  9. Piston Oil Nozzle (1) - Remove [4x]
  10. GM5028823Courtesy of GENERAL MOTORS COMPANY

    Oil Flow Check Valve (2) - Remove

  11. Oil Flow Check Valve Seal (1) - Remove and DISCARD
scientia non olet · About LEMON Manuals