Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Turbocharger Heat Shield (2) - Install NEW
- Compressor Air Intake Turbocharger (1) - Install
- Turbocharger Bolt (3) - Install, but do NOT tighten [4x] - Use NEW bolts.
- CAUTION:
Refer to Fastener Caution .
CAUTION:Refer to Torque-to-Yield Fastener Caution .
Turbocharger Bolt (1) - Tighten in sequence [4x]
- First Pass: 20 N.m (15 lb ft)
- Final Pass: 60 degrees - Use the special tool: EN-45059 Angel Meter
- Turbocharger Oil Feed Pipe - Install - Turbocharger Oil Feed Pipe Replacement
- Turbocharger Coolant Feed and Return Pipe - Install - Turbocharger Coolant Feed and Return Pipe Replacement (LSY)
- Positive Crankcase Ventilation Hose - Install - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement
Electrical Connector (1) @ Turbocharger Bypass Valve Solenoid (2) - Connect
- Charge Air Cooler Inlet Air Tube - Install - Charge Air Cooler Inlet Air Tube Replacement
- Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement
- Warm Up Three-Way Catalytic Converter - Install - Warm Up Three-Way Catalytic Converter Replacement
- If replacing with new, perform the turbocharger wastegate learn. Turbocharger Wastegate Learn