Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Camshaft Sprocket Bolt - Remove - Camshaft Sprocket Bolt Replacement
Loosen the EN-52461 Camshaft Torque Reaction Tool bolt (1) to release the exhaust actuator.
- Pull the EN-52461 Camshaft Torque Reaction Tool (2) away from the engine as indicated.
- Camshaft Position Actuator (3) - Remove
NOTE:
Hold the camshaft position actuator while disengaging the EN-52461 Camshaft Torque Reaction Tool from the actuator to prevent it from dropping.