Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Actuator (3) - Install
- Push the EN-52461 Camshaft Torque Reaction Tool (2) toward the engine as indicated.
- Tighten the EN-52461 Camshaft Torque Reaction Tool bolt (1) to lock the exhaust actuator.
- Camshaft Sprocket Bolt - Install - Camshaft Sprocket Bolt Replacement
NOTE:
Hold the camshaft position actuator while engaging the EN-52461 Camshaft Torque Reaction Tool to the actuator to prevent it from dropping.