Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Front Bumper Fascia (1) - Remove - Front Bumper Fascia Replacement (with Blackwing)
Front Cradle Shear Plate (1) - Remove - Front Cradle Shear Plate Replacement (Blackwing)
- Place a drain pan under the vehicle.
Transmission Fluid Cooler Pipe Bracket Bolt (1) - Remove
Transmission Fluid Cooler Pipe Nut (1) - Remove
Transmission Fluid Cooler Pipe Bolt (1) - Remove
- Transmission Fluid Cooler Pipe Bracket Bolt (2) - Remove
- Transmission Fluid Cooler Pipe Bracket (3) - Remove
- Retaining Clip (4) - Disengage
- Transmission Fluid Cooler Inlet and Outlet Pipe (5) - Disconnect
Retaining Clip (3) @ Transmission Fluid Auxiliary Cooler Inlet Pipe (1) - Disengage
- Transmission Fluid Cooler Inlet and Outlet Pipe (2) - Disconnect
Transmission Fluid Cooler Pipe Bracket Bolt (1) - Remove
Transmission Fluid Cooler Pipe Nut (3) - Remove
- Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Disconnect
- Transmission Fluid Cooler Seal (2) - Remove and DISCARD
- Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Remove