Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Install
Transmission Fluid Cooler Seal (2) - Install NEW
Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Connect

CAUTION:

Refer to Fastener Caution .

Transmission Fluid Cooler Pipe Nut (3) - Install and tighten to 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Install and tighten to 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Inlet and Outlet Pipe (2) - Connect [2x]
Retaining Clip (3) - Engage [2x]
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (4) - Install and tighten to 9 N.m (80 lb in)
Transmission Fluid Cooler Seal (3) - Install NEW
Transmission Fluid Cooler Inlet and Outlet Pipe (2) - Connect
Transmission Fluid Cooler Pipe Bolt (1) - Install and tighten to 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Install and tighten to 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Nut (1) - Install and tighten to 22 N.m (16 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Install and tighten to 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Cradle Shear Plate (1) - Install - Front Cradle Shear Plate Replacement (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Install - Front Bumper Fascia Replacement (with Blackwing)
Lower the vehicle.
Check the transmission fluid level. Transmission Fluid Level and Condition Check
Inspect for transmission fluid leaks. Fluid Leak Diagnosis