Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Intake Air Duct (1) - Remove - Intake Air Duct Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Crossmember Brace (2) - Remove - Front Crossmember Brace Replacement
Courtesy of GENERAL MOTORS COMPANY

Catalytic Converter Brace (2) - Remove - Catalytic Converter Brace Replacement (LGY)
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Remove
Lower the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Clip Bolt (1) - Remove
Transmission Fluid Cooler Pipe Bracket Bolt (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Remove
Raise the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Nut (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Cap the fittings and plug the holes when removing the transmission fluid cooler pipes.

Maneuver the transmission fluid cooler inlet and outlet pipe (1) as necessary to remove from the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Seal (1) - Remove and DISCARD [2x]