Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Auxiliary Radiator Front Inlet Duct - Right Side (1) - Remove - Auxiliary Radiator Front Inlet Duct Replacement - Right Side (LGY)
Courtesy of GENERAL MOTORS COMPANY

Front Wheel Drive Half Shaft - Right Side (1) - Remove - Front Wheel Drive Half Shaft Replacement - Right Side
Courtesy of GENERAL MOTORS COMPANY

Front Crossmember Brace - (2) Remove - Front Crossmember Brace Replacement
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disengage the 2 transmission fluid auxiliary cooler pipe clips (1) at the brackets.
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Clip Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Remove
Transmission Fluid Cooler Pipe Nut (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Cap the fittings and plug the holes when removing the transmission fluid cooler pipes.

Maneuver the transmission fluid cooler inlet and outlet pipe (1) as necessary to remove from the vehicle.
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Seal (1) - Remove and DISCARD [2x]