Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Compartment Side Trim Replacement - Left Side - Remove - Rear Compartment Side Trim Replacement - Left Side
- Transfer Case Control Module - Remove - Transfer Case Control Module Replacement
- Electronic Suspension Control Module - Remove - Suspension Control Module Replacement
- Disconnect the electrical connectors from the fuse block.
Rear Body Fuse Block Bracket Bolt (1) - Remove
- Body Wiring Harness Junction Block Bracket Nut (2) - Remove [2x]
- Disconnect the wiring harness retainers from the bracket.
Pull the rear body fuse block bracket (1) rearward and slightly upwards to release the body fuse block bracket pins from the rear wheelhouse inner panel.
- Transfer components as necessary.