Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Engage the multifunction power supply converter (1) into the multifunction power supply converter bracket (2).
- Connect the electrical connector.
Install the multifunction power supply converter bracket (3), into position.
- Multifunction Power Supply Converter Bracket Bolt (4) - Install and tighten [2x] 9 N.m (80 lb in)
- Retainer (1) - Engage [3x]
- Electrical Connector (2) - Connect
- Rear Compartment Side Trim Panel- Left Side - Install - Rear Compartment Side Trim Replacement - Left Side
CAUTION:
Refer to Fastener Caution