Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Courtesy of GENERAL MOTORS COMPANY

Accessory Drive Primary Belt (1) - Remove - Accessory Drive Primary Belt Replacement
Courtesy of GENERAL MOTORS COMPANY

Intake Manifold Cover (1) - Remove - Intake Manifold Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Charge Air Cooler Outlet Air Tube (2) @Throttle Body - Remove - Charge Air Cooler Outlet Air Tube Replacement
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Evaporator Tube Clip Bracket Bolt (4) - Remove
Reposition the air conditioning compressor hose.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Intake manifold is transparent.

Battery Positive Cable Nut (1) @Generator - Remove
Auxiliary Generator Battery Jumper Cable (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) - Disconnect
Courtesy of GENERAL MOTORS COMPANY

Remove the upper generator bolt (1).
Loosen the lower generator bolt (2) until it is disengaged from the generator bracket.
Courtesy of GENERAL MOTORS COMPANY

Remove the generator (1) and transfer the generator lower mounting bolt (2), if necessary.