Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Install the engine wiring harness fuse block bracket (2) by engaging the 3 retaining tabs (1), to the body wiring harness junction block bracket (3).
Engage the 2 retaining covers (2), and install the electrical connectors (1).
Engine Wiring Harness Junction Block (2) - Install - Engine Wiring Harness Junction Block Replacement
Battery Positive Cable (3) - Install
- Auxiliary Generator Battery Jumper Cable (2) - Install
- Battery Positive Cable Nut (1) @Engine Wiring Harness Fuse Block Bracket - Install and Tighten 15 N.m (11 lb ft)
Battery Distribution Engine Compartment Fuse Block (2) - Install - Battery Distribution Engine Compartment Fuse Block Replacement (LSY) , or Battery Distribution Engine Compartment Fuse Block Replacement (LGY)
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution