Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Auxiliary Generator Battery Jumper Cable (1) - Install
Auxiliary Generator Battery Jumper Cable (1) - Install
- Battery Positive Cable Nut (2) @Generator - Install - Generator Replacement (LSY)
Auxiliary Generator Battery Jumper Cable (2) - Install
- Battery Positive Cable Nut (1) @Starter Solenoid - Install - Starter Replacement (LSY)
- Retainer (3) - Engage
Retainer (1) - Engage [3x]
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Auxiliary Generator Battery Jumper Cable (1) - Install
- Battery Negative Cable Ground Nut (2) @Starter Stud (3) - Install - Starter Replacement (LSY)
Auxiliary Generator Battery Jumper Cable (6) - Install
- Auxiliary Generator Battery Jumper Cable Nut (2) - Install - Battery Distribution Engine Compartment Fuse Block Replacement (LSY)
- Battery Positive Cable Nut (3) - Install - Engine Wiring Harness Fuse Block Bracket Replacement
- Battery Negative Cable Ground Bolt (4) @Front End Upper Tie Bar Extension - Install and Tighten 22 N.m (16 lb ft)
- Retainer (5) - Engage [3x]
- Fuse Block Cover (1) - Install
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution