Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Programmable Temperature Valve Actuator- Air Inlet Valve Actuator (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Heater and Air Conditioning Evaporator and Blower Upper and Blow Lower Case Bolt (1) - Install and tighten 1.5 N.m (13 lb in)
Courtesy of GENERAL MOTORS COMPANY

Heater and Air Conditioning Evaporator and Blower Upper and Blow Lower Case Bolt (2) - Install and tighten 1.5 N.m (13 lb in)
Connect the electrical connector. (1)
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Compartment (2) - Install - Instrument Panel Compartment Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Airbag - Passenger Side (2) - Install - Instrument Panel Lower Airbag Replacement - Passenger Side
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Panel Insulator - Right Side (1) - Install - Instrument Panel Lower Trim Panel Insulator Replacement - Right Side
Courtesy of GENERAL MOTORS COMPANY

Body Control Module Bracket (1) - Install - Body Control Module Bracket Replacement
Clear the DTCs.
Perform the actuator calibration procedure. Actuator Recalibration