Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Inside Ambient Air Quality Particulate Sensor Module (1) - Install
Connect the electrical connector. (3)
- Wiring Harness Retainer (2) - Install
- Heater and Air Conditioning Evaporator and Blower Module Heat Shield Bolt (1) - Install and tighten 1.5 N.m (13 lb in)
Heater and Air Conditioning Evaporator and Blower Module Heat Shield Bolt (1) - Install and tighten 1.5 N.m (13 lb in)
Instrument Panel Compartment (2) - Install - Instrument Panel Compartment Replacement
Instrument Panel Lower Airbag - Passenger Side (2) - Install - Instrument Panel Lower Airbag Replacement - Passenger Side
Instrument Panel Lower Trim Panel Insulator - Right Side (1) - Install - Instrument Panel Lower Trim Panel Insulator Replacement - Right Side
Body Control Module Bracket (1) - Install - Body Control Module Bracket Replacement
CAUTION:
Refer to Fastener Caution .